泰克P6701B
如果您對該產品感興趣的話,可以
產品名稱: 泰克P6701B
產品型號:
產品展商: Tektronix泰克
產品文檔: 無相關文檔
簡單介紹
泰克P6701B
泰克p6700系列光電（O/E）轉換器改變光信號轉變為電信號以方便分析泰克dpo7000和DPO或DSA / mso70000系列示波器與適當的適配器（見腳注1和2），裝有TEKPROBE接口其他泰克示波器，或當使用1103探棒電源供應器。的p6700系列/電子轉換器的光源特性在開發、制造或服務的理想，光通信系統和設備。
泰克P6701B
的詳細介紹
泰克P6701B
聯系人:何R 13929231880
曹R 13580800393
QQ在線：2880196032
電 話 ：0769-81283426
傳 真 ：0769-82553292
E-MAIL：13580800393@126.com
公司網址http://www.qihang18.com
地址：東莞市塘廈鎮塘龍東路63號
24小時免費專線:400 0769 832
P6701B Optical-to-Electrical Converters
Features & Benefits
Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
High-bandwidth DC up to 1.2 GHz
High Gain 1 V/mW
Low Noise <11 pW/√Hz
Probe Connects to DPO7000*1 and DPO/DSA/MSO70000*2 Series
SONET/SDH and Fibre Channel Reference Receiver Performance:
TDS500C/700C (Opt. 3C or 4C)
P6701B – Fibre Channel up to 1063 Mb/s
P6703B – SONET/SDH up to 622 Mb/s
Applications
Eye Pattern Testing of Optical Communication Signals(SONET/SDH and Fibre Channel)
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/DSA/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/DSA/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Performance You Can Count On
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
*1 Requires the TPA-BNC adapter.
*2 Requires the TCA-BNC adapter.
